Shop
ISO GENERATOR
Application:
- Identical engine oil blend used in RV generator production.
- Protects against wear in air- or water-cooled engines.
- Formulated to give protection against oxidation and increased oil viscosity to help reduce engine wear and oil consumption.
- Provides excellent protection in water cooled engines where high speeds or longer drain intervals may be experienced.
Performance level:
SAE 40/50
API CD/SE
MIL L-2104D
Packing :
20 Litres & New Steel Drum & IBC
ISO GL-1
Application:
- Excellent film strength at high operating temperatures
- Excellent heat transfer properties to keep gearsets cool
- Outstanding resistance to foaming
- Prevention of copper and brass corrosion
Performance level:
API GL-1
Packing :
20 Litres & New Steel Drum & IBC
ISO GEAR GL-4
ISO GEAR GL-4 LUB Gear Oils
– Extremely good anti wear quality.
– Excellent general compatibility.
– High emulsifying characteristics.
– Good protection for cold running..
API GL-4
& 20 Litres & New Steel Drum & IBC
ISO FULLY SYN Compressor VDL
ISO FULLY SYN Compressor VDL
– Oil-flooded rotary screw, rotary lobe, and rotary vane air compressors
– Circulating systems requiring a part-synthetic lubricant
– Excellent oxidation resistance to minimize sludge and varnish formation
– Good wear protection
– Good foam resistance
– Natural detergency
– Protects against rust and corrosion
– Aids reliable performance in severe, extreme pressure operations, promoting extended compressor service life
– Keep-clean performance assists protection against deposit formation and helps reduce fire and explosion risk
– Designed to promote protection against oxidation and system corrosion
New Steel Drum
- DIN 51517 Part 2, Lubricating Oils, Type CL
- DIN 51517 Part 3, Lubricating Oils, Type CLP
- Part-synthetic formulation for enhanced
ISO EP LITHIUM GREASE
ISO EP LITHIUM GREASE
– Protection under heavy load & extreme pressure conditions.
– Suitable for lubrication of bearings running at higher temperatures.
– Protects against wear & corrosion, loading service periods.
– Increase the life of bearing, slide-bearings, axles & joints.
– Can be used for the lubrication of electro motors, ventilators, etc
100, 250, 450, 900 Gr & 4.5, 15 , 180 Kg
ISO EMULSION LUB
ISO EMULSION LUB
– Easily mixed
– Pleasant odor
– Non irritating to skin
– Non-staining
– Good lubricity & film strength
– Stable emulsion
– High rust threshold
- Resists rancidity
- Rejects tramp oil
20 Litreres & Drum
ISO DIESEL anti freez
Application:
– Removes water from diesel or gasoline systems, treats up to 250 gallons
– Significantly reduces the freezing point of water in the fuel system
– Also provides excellent fuel lubrication
– Can be used in combination with SI-1 Complete Fuel System Cleaner, Diesel Fuel Catalyst .
Packing:
300 CC & 1 & 4 & 20 Litreres & Drum & IBC
ISO CVT Full Synthetic
ISO CVT Full Synthetic
– Excellent oxidation resistance
– Anti-shudder durability
– Excellent wear protection
– Exceptional shear stability
– Low temperature fluidity
– Low foaming and smooth gear change and extended fluid life
– Extensive protection against wear, corrosion and foaming Well tuned friction properties
CVT meet to :
- BMW/MINI P/N 83 220 136 376, P/N 83 220 429154, EZL 799, EZL 799A
- Daihatsu AMMIX CVTF, CVTF-DC, CVTF-DFE
- Dodge/Jeep NS-2, CVTF+4
- Ford CVT23, CFT30, WSS-M2C933-A, MotorcraftXT-7-QCFT, MERCON® C
- General Motors CVTF I-Green2, DEX-CVT
- Honda/Acura HMMF (without starting clutch),HCF-2
- Hyundai/Kia SP-CVT 1, SP-III (CVT only)
- Mazda CVTF 3320
- Mercedes Benz 236.20
- Mitsubishi CVTF-J1, CVTF-J4, SP-III (CVT only)
- Nissan NS-1, NS-2, NS-2V, NS-3, Nissan D-Matic(N-CVT only)
- Shell Green 1V
- Suzuki TC, NS-2, CVTF 3320, CVT Green 1, CVTGreen 2, CVT Green 3
- Toyota TC, FE
- Volkswagen/Audi TL 52180, G 052 180 A2, G052 516 A2
- Litre & New Steel Drum & IBC
ISO CJ-4 EURO VI
– Naturally aspirated and turbo-charged diesel powered engines built by European, Japanese, and American manufacturers
– On-highway light and heavy-duty trucking including mixed fleets with gasoline engines and cars
– High level of protection against wear and corrosion, even when using diesel fuels with high Sulphur content
– Safe protection against deposits, sludge and sticking
– Outstanding thermal stability on the basis of low-volatility base oils
– Extremely low oil and fuel consumption
– Reduced cold-wear behavior and fast engine permeation
SAE 10w40 & 15W40
API API CJ4 – Euro VI meet to ACEA E9/E7/E
20 Litres & New Steel Drum &
ISO CK-4/CJ-4 LUB OIL
Application:
– Resists oxidation, even under high-heat conditions, minimizing engine deposits and extending service intervals
– Reduces aeration, which helps prevent oil breakdown, cavitation and corrosion
– Improves shear stability, which translates into consistent viscosity under high loads for better lubrication and protection
Specification:
SAE 10w40 &15W40
API API CK-4, meet to ACEA E9-16, E7-04 • Caterpillar ECF-3, ECF-2, ECF-1a, TO-2
Packing:
20 Litres & New Steel Drum & IBC
ISO Fully Syn. SN LUB
Application:
– Formulated for reliable protection against harmful sludge and varnish formation and helps improve engine performance
– Designed with low ash-forming additives to help reduce deposit build-up in diesel particulate filters (DPF), extending service life
– Low phosphorus and sulphur aid increased three way catalytic convertor (TWC) and other gasoline after treatment system lifetime
-Fully Synthetic Oil
- Low viscosity oil enhances mileage and performance
- Ensure long lasting engine life by preventing it from rust & corrosion
- High cleaning capability & anti-nox property for more environment friendly
Specification
SAE 5W30 & 5W40
API SN
Packing
1 & 4 Litres & New Steel Drum & IBC
Iso turbine oil
Application:
– Extraordinary resistance to ageing and sludge formation.
– High resistance to rust.
– Great water separation capacity.
– Excellent anti-foam properties.
PERFORMANCE LEVELS
DIN 51515 (R&O)
Alestom Atlantique NBA P50001
General Electric GEK -32568C
BS 489:1999
VISCOSITY CLASSES
32 , 46 , 68 , 100
PACKING
New Steel Drum
ISo CI-4 EURO III
– Naturally aspirated and turbo-charged diesel powered engines built by European, Japanese, and American manufacturers
– On-highway light and heavy-duty trucking including mixed fleets with gasoline engines and cars
– High level of protection against wear and corrosion, even when using diesel fuels with high Sulphur content
– Safe protection against deposits, sludge and sticking
– Outstanding thermal stability on the basis of low-volatility base oils
– Extremely low oil and fuel consumption
– Reduced cold-wear behavior and fast engine permeation
SAE 10w40 &15W40 &20W50
API API CI-4 Euro III
20 Litres & New Steel Drum & IBC
ISO CI4 LUB
-Different types of diesel engines and ultra-modern tractors with potential to work in hard conditions
-Construction and mines machinery Maximum engine protection
-Transportation Heavy vehicles
– Excellent engine cleanliness
– Extended exchange intervals
-meet to Modern Industrial Diesel Engines
-Advanced agricultural and construction equipment
SAE 15W40 & 20W50
API CI-4
20 Litres & New Steel Drum & IBC
ISO CF-4 LUB Motor Oil
Application:
– Strong oil film.
– High lubrication power.
– Low loss by evaporation.
– Effectively controls all kinds of rusting & corrosion.
Performance level:
SAE 15W40 & 20W50
API CF-4
Packing:
20 Litres & New Steel Drum & IBC