The post ISO MARINE T. LUB first appeared on BITOIL - International.

• High way heavy duty truck
• Construction and Mining
• Agricultural equipment
• Marine Engines
• ADVANTAGES:
•                          -Engine Cleanliness
•                          -Low Engine Wear
•                          -High Temperature protection
•                          -Protection against oxidation.
•                          -Extend engine life
•                          -Easier engine starts under cold conditions
• SPECIFICATIONS:
•                       SAE                      15W40
•                       API                        CH4
• Recommendation:
• Caterpillar Cummins DDC Deutz IVECO MACK MAN MTU Volvo

The post ISO MARINE W LUB 15W40 first appeared on BITOIL - International.

• Medium spped industrial or marine propulsion and auixillary engines,burning residual, blended or distillate fuel oils, which create create conditions of low oil stress. These conditions usually occur:
• -In newer engine designes, less than 10 years oild
• -Where oil consumption is > 1.5 g/kWh
• -Where load factor are <70%
• -Where fuels with sulphur <2% are in use

ADVANTAGES:

• -Very high resistance against oxidation.
• -High detergent & dispersant properties.
• -Strong oil film.
• -High lubrication power.
• -Low loss by evaporation.
• -Effectively controls all kinds of rusting & corrosion.

SPECIFICATIONS:

                     SAE                     30/40

                                  API                                    CF-4

The post ISO SUPER MARINE LUB first appeared on BITOIL - International.

manufactured from the best mineral base oil & advanced technology additives and also low

sulphated ash content , to meet the most demanding lubrication requirements 2-stroke

diesel engines .

The post ISO MARINE DD LUB first appeared on BITOIL - International.

• Enclosed industrial gear systems
• Wind turbines and related machinery
• Bearings
• Splash lubricated system

ADVANTAGES:

•   -Long life-Maintenance saving
• - Maintenance system efficiency
• -Excellent wear & corrosion protection

 SPECIFICATIONS:

•                      SAE                      220/320
•                      DIN                     51517 part 3 - CLP

The post ISO GEAR OIL LUB .FULLY SYN. first appeared on BITOIL - International.

• -Highly rated, medium speed, main propulsion and auxiliary trunk piston stationary and marine diesel engines
• -Performing satisfactory in smaller high-speed engines typically use in fishing fleets which oprate under arduous conditions and have small sump sizes
• -Turbochargers, oil filed stem tubes and variable pitch propellers
• -Deck machinery

ADVANTAGES:

•                   -Very high resistance against oxidation.
•                   -High detergent & dispersant properties.
•                   -Strong oil film.
•                   -High lubrication power.
•                   -Low loss by evaporation.
•                   -Effectively controls all kinds of rusting & corrosion.
•                   - Excellent water resistance.
•                   - Engine Protection

SPECIFICATIONS:

•                       SAE                     40/30
•                       API                         CF

The post ISO MARINE DISOLA LUB first appeared on BITOIL - International.

• Low System Marine diesel engine crankcase and piston cooling systems
• Turbochargers, geared transmissions, oil lubricated stern tubes & deck machinery
• All ancillary equipment requiring an SAE 30 oil

ADVANTAGES:

•                          -Detergency at clean level.
•                          -Improve engine operation.
•                          -Protect the environment.
•                          -Protection against oxidation.

 SPECIFICATIONS:

SAE                      30

The post ISO MARINE HD 30 first appeared on BITOIL - International.

•                   - Very high resistance against oxidation.
•                   - Effectively controls all kinds of rusting & corrosion.
•                   - Excellent anti- foaming ( silicon free)
•                   - Low pour point
•                   - High viscosity index

SPECIFICATIONS:

•                   ISO 6743-4
•                   DIN 51524 – Part 3

The post ISO MARINE HYD. HVLP ZS(SILICON FREE) first appeared on BITOIL - International.

• Highly Rated medium speed diesel engines operating under high load or overload conditions.
• General Ship application, including Gears, Where specialist lubricant are not required

ADVANTAGES:

•                 -High resistance against oxidation in order to get a longer drain period.
•                 -Good detergent & dispersant properties.
•                 -High detergent and dispersant.
•                 -Excellent anti-wear properties.
•                 -Improved reliability
•                 - lower maintenance costs

SPECIFICATIONS:

•                       SAE                     50/40/30
•                       API                               CF

The post ISO MARINE PLUS LUB first appeared on BITOIL - International.

• Application:
• Industrial Hydraulic System
• Mobile hydraulic fluid power transmission system
• Marine hydraulic systems

• ADVANTAGES:
• Long fluid- maintenance saving
• Maintaining system efficiency
• Outstanding wear protection 
• PERFORMANCE LEVELS:
•       DIN 51524 Part 3 # (HVLP); DENISON HF-0
• Compatibility:
• Paint compatibility
• Seal compatibility
• PERFORMANCE LEVELS:
•  DIN 51524 Part 3 # (HVLP); DENISON HF-0
• Compatibility:
• Paint compatibility
• Seal compatibility

The post ISO MARINE HYD. HVLP LUB first appeared on BITOIL - International.